£16,000 pa
(£4.90/sq. ft. pa)
Light industrial to letUnits 1&2, Lyde Arundel, Hereford HR4
3,263 sq. ft
Just added
Available immediately
About this property
Accessible location
Private position
Flexible terms
Multiple access points
Units 1 & 2, lyde arundel.
Detached workshop unit within close proximity of hereford.
•Accessible location;
•Private position;
•Flexible terms;
•Multiple access points.
Total: 303.07sqm (3,262.22sqft).
Location
Units 1 & 2 Lyde Arundel are located approximately 3.9 miles north of Hereford City Centre with easy accessibility off the A4110, which in turn provides direct access to the A4103, leading to the A49.
Description
The Units comprise a detached workshop premises with roller shutter doors, internal office space and parking. At present the building is split into 2 distinct areas separated by a stud wall.
Unit 1 comprises of an open plan, single bay workshop area with a side pedestrian door, leading to external storage where a shipping container is currently located. There is a manual roller shutter door to a height of 3 metres, and a minimum eaves height of 3.2 metres.
Unit 2 comprises 2 bays with 2 roller shutter doors and a pedestrian access door. There are internal partitions creating 2 offices, along with an enclosed corridor at the rear. There is a stud wall to create a separate bay with dedicated roller shutter access. An internal staircase leads to the small first floor.
The property benefits from a water supply and kitchen area, with an electric water heater mounted below the sink.
Detached workshop unit within close proximity of hereford.
•Accessible location;
•Private position;
•Flexible terms;
•Multiple access points.
Total: 303.07sqm (3,262.22sqft).
Location
Units 1 & 2 Lyde Arundel are located approximately 3.9 miles north of Hereford City Centre with easy accessibility off the A4110, which in turn provides direct access to the A4103, leading to the A49.
Description
The Units comprise a detached workshop premises with roller shutter doors, internal office space and parking. At present the building is split into 2 distinct areas separated by a stud wall.
Unit 1 comprises of an open plan, single bay workshop area with a side pedestrian door, leading to external storage where a shipping container is currently located. There is a manual roller shutter door to a height of 3 metres, and a minimum eaves height of 3.2 metres.
Unit 2 comprises 2 bays with 2 roller shutter doors and a pedestrian access door. There are internal partitions creating 2 offices, along with an enclosed corridor at the rear. There is a stud wall to create a separate bay with dedicated roller shutter access. An internal staircase leads to the small first floor.
The property benefits from a water supply and kitchen area, with an electric water heater mounted below the sink.
.png){kind=logo}