Apartment for sale in Heaven's Hill Village II, Sun Valley, Northern Cyprus

Structure:
All of the building structures will be of Seismic Reinforced Concreate as stated in the project
plans and drawings. Foundations are continues foundation system in Euro standards. All iron
and concrete used in constructions comply with 2015 earthquake regulations tests are done.

Walls:
Perforated thick clay building bricks will be used for all external walls of the buildings as stated
in the project plans and drawings. Internal walls will be isolated panel walls.

Wall finishing:

•External Walls:
3 layers of cement-based plaster will appropriately be applied. Special care will be taken
to obtain smooth finishing, proper corners and edges. Before the application of undercoat
paint, all the walls will be rubbed down smoothly and any cracks will be cut down and
filled. After the application of undercoat, a thin layer of paste will be applied and rubbed
down again where necessary. 3 layers of 100% acrylic based paint (resistant to salt and
sun corrosion) will be applied for finishing.
•Internal Walls:
3 layers of cement-based plaster will appropriately be applied and rubbed down to obtain
a smooth surface. Special care will be taken to achieve proper corners and edges. Before
the application of undercoat paint, all the walls will be rubbed down smoothly and any
cracks will be cut down and filled. After the application of undercoat, a thin layer of paste
will be applied and rubbed down again where necessary. 3 layers of plastic based paint
will be applied for finishing.
•Ceilings:
Since plywood forming will be used for the structure of the ceilings, there will be some
roughness or blemishes at the joints of the plywood and the corners only. These will be
rubbed down in order to have completely smooth surfaces. Line based ready-made
plaster will be applied (Sivateks, Bimtex, Weber or equivalent) and surfaces will be
rubbed down and cleaned to have them ready for painting. After the application of
undercoat, a thin layer of paste will be applied and rubbed down again where necessary.
3 layers of plastic based paint will be applied for finishing. (For painting Marshall, Dyo or
equivalent quality paints will be used.) Suspended ceilings will be fitted in corridors and
all bathrooms.

Wet surfaces:
The bathroom and WC will have non-slip ceramic tiles on top of two layers of cement-based
plaster and two layers cement-based isolation (basf or Weber or equivalent). The ceramic
wall tiles will be laid up to the suspended ceiling of the room. Ground ceramic will be non-slip
type, the ceramic tiles will be fixed with 2-millimeters space between them. (The ceramic tiles
value will be up to 12 $.)

floor covering:
All internal floor coverings will be on top of 10-12 cm concrete levelling. Internal floor
coverings will be high quality ceramic tiles. There will be 7 cm high skirting boards fixed where
necessary from the same materials. (The ceramic tiles value will be up to 12 $)
Outdoor terraces and balconies will have 2 coats of cement-based waterproof isolation. These
areas will be non-slip ceramic tiles with 7 cm high skirting boards.
All roof terraces will be cover non-slip standard ceramic tiles. Ceramic value is 12 $
All standards to be determined by vendor.
Windowsills will be granite or natural marble.

Doors and windows:
The entrance door will be manufactured from plywood covered with PVC and mdf material
and will be painted natural wood colour. Handles of the doors, stoppers, locks and the hinges
will be high-quality materials.
All bedroom doors will be American pressed type. Internal doors’ handles, stoppers, locks and
the hinges will be of the high-quality materials. Bathroom doors will be frosted glass with
white aluminium frame.
All the external doors and windows (except the entrance door) will be double glazed isolated
aluminium system, complete with all fixtures and fittings. The colour of the aluminium
windows and doors will be wood colour (Linnea Rossa or equivalent).

Bedroom wardrobes:
Bedroom Wardrobes will be sliding doors type made from laminated material. Their height
will be 2.26 meters and at least one door will have a mirror fixed on. There will be an adequate
number of shelves, drawers and hanging rails. The colour of the wardrobes must be approved
by the purchaser.

Kitchen:
For kitchen cupboards, the frame will be of mdf and doors will be of laminated material as
stated in the original plans and drawings. There will be an adequate number of shelves, drawers, dust bin and plate shelves. Granite worktop is going to be included and standard
worktop will be chosen by the contractor. The kitchen sinks will be stainless steel with 1 bowl
(Franke or equivalent). Colours of the cupboards and drawers’ handles will be chosen by the
management. Kitchen tap will be Hans Grohe or equivalent. (All white goods are optional, integrated and standard size).

Sanitary ware:
The sink basin (Duravit, Vitra or equivalent) and lavatory will be fixed appropriatery according
to the project plans and drawings. They will be complete and in good working order. All the
lavatories will be a wall hanging type with an integrated reservoir. All showers will be walk-in
type with a glass separation, water mixer and showerhead. There will be sink basins and mirror
will be fitted to the wall above. All armatures will be of first-class chrome plated type (Hans
Grohe or equivalent) and have one mixer tab for shower, bathroom sink and kitchen sink will
be used. Each bathroom and WC will have a toilet paper holder, and towel hangings.

Mechanical works:
Each apartment will have air conditioner split unit system installed that will reach each room
in the property, except bathrooms. The system will be chosen by the contractor. Each unit will
have a boiler and water heating unit which will be placed inside the apartment. All internal
hot and cold-water piping will be plastic and external piping will be galvanised iron. All waste
water piping will be plastic as stated in the project plans and drawings. Rain water drainage
piping will also be plastic and will be fixed outside the buildings (needs maintenance every 3
months. All the buildings’ waste waters will be connected to waste water treatment plant.
All buildings will have a stand by water station pump.

Electrical works:
All the electrical works will be done according to the British Standards and as stated in the
electrical project. All the materials used will be emo (Chamber of Electrical Engineers)
approved. In addition, it will be connected to a communal standby generator for the
emergency power requirements of the whole site (all apartments). It will always be ready to
provide emergency power supply automatically with a changeover mechanism whenever
there is a power cut.
The infrastructure of the main electricity supply to the site and the transmission unit will
provided by the contractor.

Swimming pools:
There will be communal swimming pool according to the architectural and mechanical
projects.

Ground arrangements:
The road front part of the project area will have Local Authority approved pavements. There
will be car parks as stated in the project. There will be appropriate wire and/or iron fencing
surrounding the plot area with the exception of road front.
The materials which needs to be approved by the management will have to be decided upon
within a week following the provision of the samples by the contractor. The contractor will
not be responsible for any delays caused by late approvals.
Common areas will be secured by CCTV cameras 24/7.